T-80 Manual

♦How to fly a console♦

▷ It is advised to use the rlv enabled HUD with the T-80 system, but you have the option of using the rlv enabled HUD or normal HUD. Both are included.
▷ Enabling rlv may differ depending on your viewer, but for Firestorm, open preferences/firestorm/extras and check RLVa at the top.
▷ Will enable extra features such as non-touch teleportation when entering the exterior.

Attach HUD
▷ Click front.
▷ Click clock-face
▷ If there is no exterior in your HUD. You will have to add one.
Select |Settings| from HUD menu, and then |T-80 HUD installer|. Right-click the installer, drag a T-80 exterior into the SL edit-box CONTENTS tab. Click the installer to finish.
Select Summon
►If you have a console, you’ll be able to walk into the exterior and be teleported to your console.

► If you don’t have a console, select |saved locations| from the HUD menu. Select a destination
– Walk into exterior
– You’ll be teleported to the new location and the exterior will appear around you.
▷ To fly in an exterior. Summon an exterior, right click, and fly.
Use arrow keys, and page up and page down to fly!
————————————————————
♦T-80 HUD functions (Pocket-watch version)♦
▷Click to open, select clock face. Note your console
1. Summon
Summon your default exterior – an exterior will always correct for the land’s gradient. It senses any slopes and adjusts for a perfect land.
2. Dismiss
Dismiss your landed exterior
3. Exterior
Select your current exterior for summoning, or if you have one summoned, it will replace the current exterior
4. Sim Summon
Choose a rezzer pad from the sim you’re in. If there are any rezzers available to you, they will appear on this menu.
5. Saved Locations
Relates to the notecard |locations| found in the HUD. Right click the hud and select this named notecard to adjust the saved personal locations. Requires no console.
6. Open/Close door
Open the doors to your exterior/Console
7. Settings
1. Clock chime ON
HUD clock is set to British time (BST and GMT – it adjusts automatically). It can chime on the hour.
2. Clock chime OFF
Select the chime on the hour OFF.
3. Summon on TP ON
Select exterior to rez whenever you teleport. Good for non-console users.
4. Summon on TP OFF
Deactivate this function
5. T-80 HUD installer
Rezzes an installer based on the TARDIS genesis eggs (see Journey to the Center of the TARDIS). Right click egg and drag an exterior into the installer. Click installer to load into your HUD.
6. Save current location
Handy for your notecard. Select this to send your current sim location to local chat. Then copy/paste this into your locations notecard and change the name of the saved location.
7 Send locations to console
You can send the data in your HUD |locations| notecard to your console, so you can perform those landings from your console as well as with your HUD.
8. Eternity Gates
Eternity Gates are sim teleporters sold by NLS. With this option the HUD will locate all Gates in sim, and on selection of a gate, will rez a teleporter to take you to that gate.
9. Toggle emotes – emotes (visible signs for showing away status’) can be selected. 4 are provided. This will temp attach to your avatar so no need for any attachment slots being filled by a second item. Select 9 again to dismiss. You can add textures to the emote by moving to your inventory from the HUD and then rezzing to the ground. Keep in mind that the emote is invisible! Add extra textures to the emote, and then take back into your inventory. Use the T-80 HUD installer to load your new emote into the HUD.
▷To hide the HUD totally, click the top button. To reveal, do the same again.
————————————————————
♦Exterior functions♦
Click the exterior (but not the doors) to gain menu.
1 – toggle flash
Toggle the lamp from flashing/non flashing
2 – toggle windows
Toggle windows from lit/unlit

▷To fly the exterior in sim, right click exterior and select fly – remember you can only do this with exteriors whether they be summoned, or on rezzers.

▷You can use the finger-click gesture included in the pack at anytime to open the doors.
————————————————————
♦T-80 CONSOLE functions♦
Power Options
– 1: Power on/off
Switch console on/off
– 2: Recharge
When on a rift rezzer, you can recharge your console from here
– 3: Show/Hide Controls
Show/Hide your console’s controls
– 4: Primary Console activation
Select which T-80 is the primary console for your HUD to be connected to
– 5: Access Mode
Choose from:
1 – Anyone
2 – Group [Group relates to the land group the console is set to]
3 – Isomorphic [Isomorphic refers to the isomorphic list you can create using the |Isomorphic Control| menu]
– 6: Auto Power Settings
Choose from:
1 – Auto Power [Powers up when avatar pilot comes online]
2 – Manual Power [Powers up when selected by pilot]
– 7: Volume [power and rotor sounds can be reduced]
1. 25%
2. 50%
3. 75%
4. 100%
5. Sound off
– 8: Rez menu
1. Re-Rez items [Rez items that are not attached to the build, such as Rotors]
2. Rez Room [Rez special items, such as addon rooms that attach to the console room main doors] This room will not delete until you request it to do so.
▷ ▷NOTE: You can also rez a doorway from this menu which experienced builders might want to create their own scenes. Make sure the doorway is the root prim, ensure the prefix to the build is *fr and then add to the console root.
3. Kill Rezzed Room (removes room).
▷ ▷ NOTE: the addon scenes here, and any addons rezzed in the navigation menu (there are three default ones, UNIT, Emergency Unit, and Recall Switch), will remain rezzed until either;
a) you select delete addon from the rez menu in power options
b) you land using another rezzable scene where upon the scene will switch
This is to allow you to have a set scene out the front you can return to if you so wish. We felt if you had a lounge you made, you would not want it to derez unless
a) it had to, because you had requested a new addon scene,
b) you desired it removed (say, for prim space).
– 9: Reset Console [Reset the console scripts]
►►NOTE: This will reset any customisations you’ve made in the settings notecard – just access the notecard, make any edit and save to reactivate the customs).
– 10: Delete Console [Kill the console!]

Scanner
► Click to open/close scanner

RP Mode (Role play mode)
1. Artron mode on [selects energy feature; artron power will drain from TARDIS flight use until zero. At zero you need to recharge. You can recharge at a rezzer RIFT (See |Navigation| or cheat via this menu with option 8: Fill Artron!]
2. Artron mode off [Switch mode off]
3. FX on [Automatic flight FX]
4. FX off [No flight FX unless selected using |FX menu|]
5. FX menu [Select a flight FX routine]
6. Random Exterior [Console will land at a rezzer selecting a random exterior that the T-80 selects]
7. Manual exterior [You select the exterior before landing]
8 Fill Artron [Cheat! See |Artron mode on|]
9 Set Vortex [set the current doorway vortex]

Interior Data
► Shows sim data on the screen where console is situated.

Repair Damage
► If you take major damage during a flight, use the |navigation| to locate a RIFT location, land, and select this function.

Space Travel
► Set console to drift in space! [RP feature]. There is a random chance of your console being knocked off course, forcing it to land at a random location.

Light Control
► Turn console lights on/off

Emergency Take-Off
► Immediate take-off!

Handbrake/Land
► Select Handbrake/Land to prepare console to TAKE-OFF or LAND.

Flight Transit
► Select when Handbrake has been set to TAKE-OFF to enter VORTEX

Navigation
1 – all [See all rezzers to land at]
2 – owner [See private rezzers owned by PILOT only]
3 – guest [See rezzers that PILOT and any guests (as added by |Isomorphic Control| have access to]
4 – saved locations [These locations can be added via your HUD (see HUD settings: |save current location| that can be then sent to your console. No need to locate the notecard (though you can if you want, it’s in your console’s main directory)]
5 – category [See rezzers set via categories. Go here to locate RIFT rezzers]
6 – search [Search for rezzer via name]
7 – randomiser [Select a random rezzer]
8 – land here [Bring the console to land wherever it is. You can select the |Rez room| from |Power Options| to have a unique landing spot rez outside the main doors.
9. – Recall Switch – Land at a scene that rezzes onto your console (Gallifrey).
10. – Emergency Unit – Land at a scene that rezzes onto your console (a Void, see “the Mind Robber” – the TARDIS is taken out of time and space).
11. – UNIT – Land at a scene that rezzes onto your console (UNIT lab).
▷ ▷ NOTE: the addon scenes here, and any addons you create yourself using the rezzable doorway, will remain rezzed until either;
a) you select delete addon from the rez menu in power options
b) you land using another rezzable scene where upon the scene will switch
This is to allow you to have a set scene out the front you can return to if you so wish. We felt if you had a lounge you made, you would not want it to derez unless
a) it had to, because you had requested a new addon scene,
b) you desired it removed (say, for prim space).

Isomorphic Control
1 – Add companion [add a companion by name to the blue box and submit]
▷ Please note: do make sure you spell their name correctly! A common error here is mis-spelling! It happens (we all do it), just double check the name you’re adding!
2 – Delete companion [delete a companion from the list]
3 – List companions [list companions]
4 – Security Active [To activate security you must first rez the field.
5 – Security Inactive [Set Security to inactive (but retain the security field in position]
6 – Security Settings
1 – Rez security [Rez the security field]
2 – Delete Security [Delete field]
3 – Security time [Set how long before warned avatars are removed from the console area]
4 – Collision mode [Set the field to activate when unauthorised avatars walk into it and recommended for lower lag]
5 – Sensor mode [Set field to sweep for unauthorised avatars]

Cloister Bell
► Activate cloister bell manually

Media Control
1 – Channels [Select a channel to play – notecard to add/remove channels can be found in console. Right click your console and in the edit panel, select |channels| to open and adjust the notecard]
2 – Enter URL [Enter a specific URL
3 – Stop [Stop media]

Exterior Proximity
► Avatars in the landed environment OUTSIDE the console. Shows on screen

Lifeform Proximity
► Proximity of Lifeforms inside the console. Shows on the scanner screen.

Other console functions:
Notecards.
Right click your console, select your SL edit box’s CONTENTS tab. You’ll see three notecards.
|locations|
►You do not need to touch this notecard
|channel|
►If you wish to adjust the channels for your media.
|settings|
► Here you can adjust:
Pose position: Right clicking on the console, you’ll have an animated pose with randomly cycling console using poses.
//adjust the pose position.
//first number: pos number moves left, neg number moves right.
//second number: pos number moves up, neg number moves down.
//third number: pos number moves forward, neg number moves backwards.

anm pos=<0,-1.1,3>
Adjust the |anm pos| based on the instructions.

console_tex=uuid – You can adjust the console texture (viewed from inside your exterior) by adding the new uuid here.

console_sou=uuid – adjust the console power sound (add the UUID code by replacing “uuid” with the code – example: console_sou=16753dac-6ecc-41e7-7316-9e706f238982
transit_sou=uuid – adjust the transit sound. Same as above.
UUIDs can be located by right clicking an item in your inventory and selecting |Copy Asset UUID| We’ve given you a selection of canon UUIDs in the notecard.
When finished, save notecard.
————————————————————
♦How to use REZZER telepads♦
Rezzers you can place in sims (WHERE YOU HAVE PERMISSION TO DO SO), that will become part of the T-80 network. These can be set for anyone to land on, or selected people, or people who use a specific land group, or solely the pilot owner.

1. Rez a Rezzer. Try and place it on whole co-ordinates. (use your SL edit box. Objects tab. Position. Best to use say, 151.000 rather than 151.2323 as SL teleports to whole numbers. Make sure X and Y are on whole numbers. The rezzer works if they’re not, but better results come from whole numbers!
2. Right click on the rezzer, use the SL edit box and select Contents tab. Drag any T-80 exteriors you want to use into the contents tab.
Hold your clicker down on the pad for a couple of seconds. You’ll get a menu.
REZZER MENU:
1. Private
2. Guest
3. Public
4. Off
5. Category
Set a category for the rezzer:
1. None
2. Personal
3. POI
4. Rift [IMPORTANT TO SET RIFT IF YOU WANT IT TO BE USED AS A REFUEL AND REPAIR STATION!]
5. Event
6. Role play
7. Social
8. Shopping
6. Default Exterior
Select a default landing exterior.
7. Rename
Name your rezzer. Name each rezzer differently
8. Show/Hide
Make the rezzer visible/invisible
9. Allow Exterior Control
enables/disables the abiility for the exterior user to fly or summon it away from the telepad
10. Delete
Delete rezzer. ALWAYS use this when deleting your rezzer!

Rename your rezzer using 7. |Rename|. Select the rezzer access from Private/Guest/Public or deactivate the rezzer with OFF. You can select a category for those searching rezzers in their console room using this function. You can set the default exterior that the rezzer will use which will override the selection from the TARDIS.

Remember: Only place rezzers where you have permission to do so!